See other templatesSee other templates

Search in Shop

Shopping cart

Cart empty

Monitor Headphone Mount free 3d print model download

I wanted a way to store my headphones, which also kept it neatly out of sight.I designed a headphone mount/stand which attaches to the 75mm VESA mount behind my LG Ultrawide mointor.The ?stand? area where the headphone band rests is 30mm wide.I have included the SolidWorks part file too.Print SettingsPrinter brand:Creality Printer: Ender 5 Rafts: No Supports: Doesn?t Matter Resolution: 0.16 Infill: 20% Filament_brand: Creality Filament_color: Black Filament_material: PLANotes: Printed the stand using the default settings in CURA for 0.4mm PLA. I designed it such that it doesn?t require any supports. It took about 2H30 to print at 80mm/s with a brim. I didn?t have M4 screws, so I printed the included M4 screw file at 90% scale, and it works surprisingly well.Post-PrintingClean-upI needed to enlarge the screw holes a tad, so I used a craft knife to trim off some excess material. How I Designed ThisThe starting point for designing this mount used the VESA MIS-D 75?75 on my LG 25UM58 monitor. Extruded the necessary support structure and headphone mount. Added triangulation for strength.Credits: rushilkisoon Rate this 3D modelDownload 3D modelsFileFile size Monitor+Headphone+Mount924 KB

Monitor Headphone Mount free 3d print model download


Call for price (~0 USD)

Description

I wanted a way to store my headphones, which also kept it neatly out of sight.I designed a headphone mount/stand which attaches to the 75mm VESA mount behind my LG Ultrawide mointor.The ?stand? area where the headphone band rests is 30mm wide.I have included the SolidWorks part file too.Print SettingsPrinter brand:Creality Printer: Ender 5 Rafts: No Supports: Doesn?t Matter Resolution: 0.16 Infill: 20% Filament_brand: Creality Filament_color: Black Filament_material: PLANotes: Printed the stand using the default settings in CURA for 0.4mm PLA. I designed it such that it doesn?t require any supports. It took about 2H30 to print at 80mm/s with a brim. I didn?t have M4 screws, so I printed the included M4 screw file at 90% scale, and it works surprisingly well.Post-PrintingClean-upI needed to enlarge the screw holes a tad, so I used a craft knife to trim off some excess material. How I Designed ThisThe starting point for designing this mount used the VESA MIS-D 75?75 on my LG 25UM58 monitor. Extruded the necessary support structure and headphone mount. Added triangulation for strength.Credits: rushilkisoon Rate this 3D modelDownload 3D modelsFileFile size Monitor+Headphone+Mount924 KB

Monitor Headphone Mount free 3d print model download

Go to top