See other templatesSee other templates

Search in Shop

Shopping cart

Cart empty

Stand for Ipad (2019) free 3d print model download

Design in work, its finished but I have not printed and tested it yet. It is designed to lock at three positions with a spring mechanism. Spring dimensions is given in picture. Print instruction: No supports needed for all parts. Parts with threads should have 0.15 layer height. Rest of the parts can be printed at 0.20 Infill: The M8 bolt should have at least 70% infill, 20% is ok for rest of the parts. Look at picture for print orientation. If you decide to test it let me know in comments if there is any issues.Print SettingsPrinter brand:Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 and 0.20 Infill: 20% and 70% Filament_brand: ? Filament_color: ? Filament_material: PLA or PETGNotes: No supports needed for all parts if you orient them as intended by design, see picture. Parts with threads should have 0.15 layer height. Rest of the parts can be printed at 0.20 ? Infill: The M8 bolt should have at least 70% infill, 20% is ok for rest of the parts. ? Look at picture for print orientation.Credits: KasZap Rate this 3D modelDownload 3D modelsFileFile size Stand+for+Ipad+(2019)12 MB

Stand for Ipad (2019) free 3d print model download


Call for price (~0 USD)

Description

Design in work, its finished but I have not printed and tested it yet. It is designed to lock at three positions with a spring mechanism. Spring dimensions is given in picture. Print instruction: No supports needed for all parts. Parts with threads should have 0.15 layer height. Rest of the parts can be printed at 0.20 Infill: The M8 bolt should have at least 70% infill, 20% is ok for rest of the parts. Look at picture for print orientation. If you decide to test it let me know in comments if there is any issues.Print SettingsPrinter brand:Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 and 0.20 Infill: 20% and 70% Filament_brand: ? Filament_color: ? Filament_material: PLA or PETGNotes: No supports needed for all parts if you orient them as intended by design, see picture. Parts with threads should have 0.15 layer height. Rest of the parts can be printed at 0.20 ? Infill: The M8 bolt should have at least 70% infill, 20% is ok for rest of the parts. ? Look at picture for print orientation.Credits: KasZap Rate this 3D modelDownload 3D modelsFileFile size Stand+for+Ipad+(2019)12 MB

Stand for Ipad (2019) free 3d print model download

Go to top